|
Home | Site Map | How To | Windows Vista | Case Studies | Articles | Forums | Services | Donations | Careers | About Us | Contact Us| |
|
Routers
Can't
make change
Can't make change Symptoms: 1) I can make all
changes except Virtual Server. If I make a change and apply, it comes back
with empty settings on Virtual Server. Cause: the software not function. For consultants, refer to case 112304PH. Can't make connect between a router to router VPN Symptom: When creating a router to router VPN, the router shows disconnected but the log doesn't list any errors. Cause: incorrect Local Secure Group or Remote Secure Group. For consultants, refer to JO081204. Error IKE[1] **Check your PFS setting ! from Linksys Causes: Authentication, IKE, and pre-shared keys don’t match. For consultants, refer to case 113004WA Losing to connect to the router after making some changes on the router or reset. Resolution: Re-set to default settings. Symptom: You have
setup tow Linksys routers as a gateway to gateway VPN. The both routers
display the VPN "Connect". However, you can't ping the remote computer by name
or ip, and the log doesn't list any errors. Causes: 1.
Incorrected Secure Group settings. For consultants, refer to case 112204CK
This
tunnel should not be initiator
Symptom: when creating router to router VPN, you may receive error "This tunnel should not be initiator" in the log. Cause: incorrect Local Secure Group or Remote Secure Group. For consultants, refer to JO081204 Post your questions, comments, feedbacks and suggestions Related Topics What's Dual WAN or Load Balance Router
Load Balancing Router
|
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2007
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.