|
Home | Site Map | How To | Windows Vista | Case Studies | Articles | Forums | Services | Donations | Careers | About Us | Contact Us| |
|
System Errors
System
error 5 - Access is denied System error 67 - The network name cannot be found System Error 71 - The network request was not accepted System error 85 has occurred. The local device name is already in use System error 85 has occurred - Case Study System error 234 - More data is available System Error 1130 - "Not enough server storage is available to process this command" and “Not enough memory to complete transaction. Close some applications and retry” System error 1219 has occurred - The credentials supplied conflict with an existing set of credentials System error 1219 - Multiple connections to a server System error 1231 has occurred. The network location cannot be reached. System Error 1240 - The account is not authorized to login from this station. System error 1311 - There are currently no logon servers available to service the logon request System error 1312 has occurred - - A specified logon session does not exist. It may already have been terminated. System Error 1314 – A required privilege is not held by the client System error 1326 has occurred - Logon failure: unknown user name or bad password System error 1326 - Logon failure: unknown user name System error 1331 has occurred - Logon failure: account current disable System error 1385 has occurred - Logon failure: the user has not been granted the requested logon type at this computer System error 1396 has occurred - Logon Failure: The target account name is incorrect. System error 6118 - The list of servers for this workgroup is not currently available System error 1726 has occurred. The remote procedure call failed. For consultants, refer to system error issue page. System error 5 - Access is denied This is a permission issue. If the net view command fails with a
"System error 5 has occurred. Access is denied." message, 1) make sure you are
logged on using an account that has permission to view the shares on the
remote computer. 3) Make sure the Netlogon service is running.
System error 8 - Not enough storage is available to process this command
Symptoms: If you attempt to start the server
service manually, the following errors may be displayed: System error 234 has
occurred. More data is available. Or system error 8 has occurred. Not enough
storage is available to process this command. The event viewer shows "Event
ID: 7023. Description: The Server service terminated with the following
error: More data is available. Or Event ID: 7001. Description: The Net Logon
service depends on the Server service which failed to start because of the
following error: More data is available.
Resolutions: 1) apply (or reapply) the latest
Windows NT Service pack. System error 51 has occurred - The remote computer is not available Symptoms: You may receive "System error 51 has occurred. The remote computer is not available" when using net use to map the computer drive. Resolutions: 1. Make sure server service is running on the remote computer.
2. Enable file and printer sharing.
Symptoms: you can ping a host but not net view it. When using net view \\hostname, you get system error 52 - a duplicate name exists on the network. Resolutions: there are two host names or alias name (cname) are pointed to the same IP. 1) check the WINS records. 2) check DNS records. 3) Go to System in the Control Panel to change the computer name and try again.System error 53 - The network path was not found. Symptom: when using net view \\ip or \\computername, you get system error 53. Resolutions: 1) if it is domain environment, check your WINS; 2) if it is peer-to-peer workgroup, enable NetBIOS over TCP/IP; 3) make sure the machine is running; 4) make sure file and Printer Share enabled on remote computer; 5) make sure client for ms networks is enabled on local computer; 6) make sure you type the correct name. 7) Make sure no firewall running or any security setting. VPN Case Study - Can ping VPN server but receive System error 53 using net useCase Study - System Error 53 - The network path was not found. System error 67 - The network name cannot be found Symptom: When using net view \\computer or net use \\IP, you may receive above error message. Resolution: 1. Make sure you type the correct computer name or shared name. 2. Make sure the Workstation service is running on the local computer while Server service is running on the remote computer. More troubleshooting here System error 67 has occurred System error 85 has occurred. The local device name is already in use Cause: net use /persistent:yes is default settings for NT and win2000/XP. If you have mapped some network drives and check the reconnect at logon, or your network uses logon script to map network drives, the mapped network drives may show red Xs. If you enable echo and pause the logon script or if using net use to map the same drive manually, you may get "System error 85 has occurred. The local device name is already in use." One thing you may want to try is using net use /persistent:no, for example, net use i: \\servername\folder /persistent:no. System error 1219 has occurred - The credentials supplied conflict with an existing set of credentialsSymptoms: 1) When you log on to a domain from w2k client; 2) when attempting to join a domain, you may receive the following error message: The credentials supplied conflict with an existing set of credentials.Resolutions: This may cause
because of attempting to make two or more connections to the same server using
two or more sets of credentials System error 1231 has occurred. The network location cannot be reached. Symptom: When using net view \\computername, you may receive System error 1231. Resolutions: 1) make sure Client for MS Networks is enabled, 2) make sure you have permission to access it. System Error 1240 - The account is not authorized to login from this station.Symptoms: 1. You may get the system error 1240
when using net view \\remotecomputer' Resolutions: 1. Use Regedit to enable
unencrypted (plain text) passwords for the SMB client. 3. Set the following policies as showing: Digitally sign client communications (always) - disabled Digitally sign server communications (always)- disabled Digitally sign server communications (when possible) - disabled LAN Manager Authentication Level set to Send LM and NTLM - use NTLMv2 session security if negotiated - (default) send LM & NTLM responses Secure channel: Digitally encrypt or sign secure channel data (always) - disabled Secure channel: Require strong (Windows 2000 or later) session key - disabled 4. Contact the third-party SMB server manufacturer if you have a third-party SMB server, such as DEC Pathworks, Samba or Linux. 5. If you are running Windows 9x, you may want to re-configure windows authentication for network logons.
System error 1311 - There are currently no logon servers available to service the logon request Symptoms: The primary purpose of logging on with cached credentials is to enable you to access the local workstation. However, if you have logged on by cached credentials, you may be unable to access network resources because you have not been authenticated. For example 1) after you log on to a w2k/xp laptop by using cached credentials, you may be unable to access the network resources. This issue is commonly experienced by laptop users whose computer resides in a Windows Server domain and who log on to the computer by using cached credentials prior to being able to establish a remote access connection. 2) You log on to a w2k/xp laptop with a domain logon option in a workgroup network. After you establish the connection and you try to map the network drives, the operation may be unsuccessful, and you may receive the following error message: "System Error: (1311) There are currently no logon servers available to service the logon request."
Resolutions: To authenticate the cached
credentials, 1) if it is w2k/xp, use net command, for example, net use
\\servername\sharename
/user:username. 2) if xp, open Windows Explorer>Tools>Map Network Drive.
Click Connect using a different user name, enter the username and password.
System error 1326 has occurred - Logon failure: unknown user name or bad password. Symptom: when using net use to map a network drive, you may receive "System error 1326 has occurred. Logon failure: unknown user name or bad password." message. Resolutions: 1) create a user account on remote computer; 2) need to enable the guest account; 3) make sure the remote computer doesn't use auto-logon and blank password; 4) make sure you have a folder or drive shared on the remote computer. 5) use net use \\servername /user:username command. Make sure you type correct command (e.g. use net use \\servername \user:username will get this error too) System error 1331 has occurred - Logon failure: account current disable Symptom: When using net use \\computername command, you may receive above error message. Resolutions: this is cache credentials issue. To fix this problem and cache the credentials, use net use \\computername /user:username command. Symptoms: When using net use \\remotecomouter\ahredname, you may receive above message. Resolution: 1. The users do not have permission to connect to the remote computer. To resolve this problem: on the remote computer, select Administrative Tools>Local Security Settings>Local Policies>User Rights Assignment, right-click on Access this computer from the network>Properties>Add Users or Groups, add everyone or any users you want to be able to access the computer from the network. 2. refer to this case: Solved: System error 1385 - Logon failure - http://chicagotech.net/netforums/viewtopic.php?t=286 System error 1396 has occurred - Logon Failure: The target account name is incorrect. Symptoms: 1. when using net use, you may
receive above message. Causes: 1. SPN for the domain that is hosting
the replica has not been propagated. Refer to RL060704 System error 6118 has occurred. The list of servers for this workgroup is not currently availableSYMPTOMS: 1) After enabling ICS/ICF, you can't see any computes on My Network places. If you try, you may get "workgroup is not accessible". 2) If you use the net view command, you may receive "System error 6118 has occurred. The list of servers for this workgroup is not currently available." message.
Resolutions:
1) This behavior can occur if you enable the ICF that will closes the ports for file sharing by default. To open these ports, right-click the network connection that is firewall protected> Properties>Advanced>Settings>Service Tab>Add, Enter 127.0.0.1) for the required Internet Protocol (IP) number. Enter UDP ports from 135 through 139, and TCP ports from 135 through 139 one by one (the external and internal port numbers should be identical). 2) This may occur if the workgroup name and the domain name are the different. 3) No master browser. Starting Computer Browser Service on one of w2k/xp computers should fix the problem |
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2007
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.