Home | Net Issues | Net How To | Wireless | Case Studies | Articles | Forums | Services | Donations | Careers | About Us | Contact Us|

Web Cisco

How to configure NAT in Cisco  RV180W - Step by step with screenshots 


1. Login RV180W Router using IE.

2. Navigate to Firewall>Advanced Settings>One-to-One NAT.

3. Click Add.

4. Enter the private IP address, public IP address, range length and service, for example,, 1 and FTP.


5. Make sure the Routing Mode is setup Gateway (NAT) by going to Networking>Routing>Routing Mode.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics



  This web is provided "AS IS" with no warranties.
Copyright © 2002-2007 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.