How to use CLI to upload/download configiguration in WLAN

	Home \| Net Issues \| Net How To \| Wireless \| Case Studies \| Articles \| Forums \| Services \| Donations \| Careers \| About Us \| Contact Us\|

How to Use the CLI to Upload/Download Configuration in WLAN Controller

1. Telnet the WLAN IP.

2. Enter the login information and upload (download) commands command as below.

User: blin
Password:*******
User:admin
Password:**********
(chicagotech) >transfer upload datatype config

(chicagotech) >transfer upload serverip 10.0.0.11

(chicagotech) >transfer upload path /

(chicagotech) >transfer upload filename wlan

(chicagotech) >transfer upload start

Mode............................................. TFTP
TFTP Server IP................................... 10.0.0.11
TFTP Path........................................ /
TFTP Filename.................................... wlan
Data Type........................................ Config File
Encryption....................................... Disabled

**********************
****************************
*** WARNING: Config File Encryption Disabled ***
**
************************************************

Are you sure you want to start? (y/N) y

TFTP Config transfer starting.

File transfer operation completed successfully.

Post your questions, comments, feedbacks and suggestions

Contact a consultant