Home | Net Issues | Net How To | Wireless | Case Studies | Articles |  Forums| Services | About Us | Careers | Quick Setup | Contact Us|

Web Cisco

 

How to connect Cisco and HP switches using Fiber Transceiver  - Step by step with screenshots

In this example, we will connect Cisco 3560G switch and HP ProCurve 2520G Switch using 1G SFP LC SX Transceiver.

Transceiver: Cisco 1000BASE-SX 30-130-01 860nm and HP X121 1G SFP LC SXP/N: 1990-4118.

3" Multiple mode fiber cable: 2MM 62.5/125

Configuration: In the port of Cisco switch, run these command to configure trunk.

switchport trunk encapsulation dot1q
switchport mode trunk

On the HP switch, please follow this article: How to configure trunk in HP ProCurve Switch - Step by step with screenshots

 

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics


 

 

 

 [footer.htm]