Home | Net Issues | Net How To | Wireless | Case Studies | Articles |  Forums| Services | About Us | Careers | Quick Setup | Contact Us|

Web Cisco


How to change IP address on HP switch without restarting  - Step by step with screenshots 


In a case you want to change your HP Procurve Switch IP address to a dynamic address, reservation address or static address, you don't need to reboot it.


1. Open web utility by enter http://HP switch IP address.

2. Navigate to Home>Quick Setup.

3. In Switch Quick Setup Parameters, click Configure.

4. In the IP Mode, you can select Manual or DHCP. Then click Save.


Note: if you want to use DHCP Reservation, you don't need to restart the switch. You just make the reservation on DHCP and then change the settings fro manual to DHCP. The DHCP server will assign the IP to the switch without restarting..


Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics