Home | Net Issues | Net How To | Wireless | Case Studies | Articles |  Forums| Services | About Us | Careers | Quick Setup | Contact Us|

Web Cisco

 

HP ProCurve Initial Configuration - Step by step with screenshots 

 

In this example, we will show you how to use DHCP Server to find the HP ProCurve switch IP address so that you can configure it.

 

1. After turn on the HP switch and connect it to your network, the DHCP should assign an IP address to the switch. Find the HP switch Mac address in the back of the switch. Open DHCP Manager and click Address Lease. Sort Unique ID and you should see the IP address assigned to the switch.

 

2. After you have the switch's IP address, login the switch using Web Browser Interface to access it, for example, http://10.0.6.67.

 

3. You can also use a computer connect to the switch directly using cable or console cable. Please refer to this post: Initial configuration of HP switch

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics


 

 

 

 [footer.htm]