How to Configure
VLAN on Cisco 3560G switch
A.
Using Network Assistance to configure VLAN
B. Using
command lines to configure VLAN
This is an
example for our wireless using Native LAN 600 which will cover
all our wireless: Intranet, Teacher, student and Public.
A. Using
Network Assistance to configure VLAN
1. Login Network
Assistance.
2. Click Front
Panel View icon.
3. Right-click on
the port you want to configure and select VLAN..
4. In the
Administrative Mode, select 802.1Q Trunk.
5. in the Native
LAN, select 600.
B. Using
command lines to configure VLAN
interface GigabitEthernet0/##
switchport
trunk encapsulation dot1q
switchport
trunk native vlan 600
switchport
mode trunk
spanning-tree
portfast
Post your questions, comments, feedbacks and suggestions
Contact a consultant
Related Topics
|