How to setup IP address on HP ProCurve switch - Step by step with screenshots

	Home \| Net Issues \| Net How To \| Wireless \| Case Studies \| Articles \| Forums\| Services \| About Us \| Careers \| Quick Setup \| Contact Us\|

How to setup IP address on HP ProCurve switch - Step by step with screenshots

1. To setup IP address on HP switch, follow this instruction to connect to the switch:

HP ProCurve Initial Configuration - Step by step with screenshots

2. After login using Web Browser Interface, select Configuration and then IP Configuration.
3. Make sure Select VLAN is Default_VLAN, IP Configuration is Manual, and enter the IP information.

4. Click Apply Changes to save the settings.

Post your questions, comments, feedbacks and suggestions

Contact a consultant